

Before
AfterEco-Dry / Real workFactory- or site-finished sealed polyurethane hardwood
Case Study / Sealed Hardwood Cleaning
Years of retail polish and oil-soap mopping left this sealed wood floor streaky and cloudy in sunlit rooms. Controlled pH-neutral extraction and rotary buffing restored clean, natural grain.
Before & after slider
Many Maryland homeowners assume dull, hazy hardwood needs a full multi-day sand and refinish. Often, the polyurethane coat is still completely intact underneath layers of sticky soap, polish haze and fine dust that catch afternoon sunlight.
| Project specification | Eco-Dry details |
|---|---|
| Surface | Intact polyurethane-sealed hardwood flooring |
| Primary condition | Dull traffic glare from stacked retail mop products and everyday soil |
| Process | Dry grit removal, controlled damp-pad wash, extraction and rotary buff |
| Dust profile | 100% dust-free (no sanding or abrasive screening) |
| Typical dry window | Under 1 hour |
| Pricing model | Square-foot total shown online before booking |
Step-by-step protocol
Step 01
We verify that the polyurethane seal is intact rather than waxed, oiled or worn down to bare gray wood. If sanding is truly needed, we say so before starting.
Step 02
Micro-grit is vacuumed gently along plank bevels and seams so buffing pads never drag sand particles across the finish.
Step 03
Controlled-moisture rotary pads loosen oils and cloudy soap film while keeping water out of plank joints.
Step 04
A soft clean buffing pad restores an even satin clarity across the open room so natural grain reads crisply without slippery shine coatings.
Observed outcome
Streaky glare and dull traffic zones gave way to an even, residue-free satin wood finish in a single afternoon with zero sanding dust or furniture relocation delays.
Usually walkable in under 1 hour
Honest scope boundaries
Clean and buff is only for sealed floors with intact polyurethane. Bare gray traffic patches, deep dog claw gouges, cupping water damage or waxed/oiled planks require a hardwood refinishing contractor.
Between professional visits
Skip acrylic shine polishes, vinegar mixes and steam mops; mist lightly with a neutral residue-free hardwood cleaner and a flat dry microfiber pad.
Verified customer proof
“Rich did an excellent job cleaning our hardwood floors after a construction project. He is very professional and courteous, and most importantly, very communicative regarding arrival time or if running late due to a previous job. I highly recommend”
More documented projects
Ready when you are
Choose your services online. We confirm the details and agree on the scope before work begins.